|
How do MailWraps® mailbox covers attach?
MailWraps® attach to standard rural mailboxes with a magnetic strip along each side of the cover. This patented feature allows the cover to stay put in any weather condition and enhances the appearance. No dangling strings or screws to distract from the beautiful designs. The cover has a cutout around the mailbox flag and handle.
What sizes are available?
MailWraps® mailbox covers are available in the standard 6.5"x19" size. All MailWraps® designs are available for standard #1 rural mailboxes.
What if my mailbox is plastic?
Not a problem! We have included four anti-theft locking straps in each package.
Just select one or two unused mounting holes on each side of your mailbox and carefully punch out the matching pre-cut holes in your MailWraps® mailbox cover. Attach the locking straps through these holes. The straps are not reusable, but additional straps can be purchased at your local hardware store in the electrical department.
Do the designs appear on both sides of the mailbox?
Yes. The design is the same on each side of the cover to decorate both sides of the mailbox.
What if the address number is covered when the MailWrap® is on the mailbox?
Each MailWraps® mailbox cover comes with a set of 1-inch vinyl self-adhesive numbers. They can be placed on the covers at the discretion of the customer or on the front door of the mailbox. The numbers are included in each package and attach easily.
How do MailWraps® hold up in the weather?
We are very proud of the high quality of our product and most users are amazed. The covers are made of a vinyl material called polypropylene developed to withstand the heat of Arizona and the cold winters of Minnesota. We guarantee that the covers will not fade, crack or peel for one year of everyday use.
We have strong winds in our area. Will MailWraps® blow away?
No. This is frequently raised as a concern, but is very seldom a problem. When attached normally, MailWraps® fit so well that wind cannot get underneath them. Concerned users can attach MailWraps® more permanently using the holes along the sides of each mailbox cover. In reality, however, this is not the problem some consumers perceive it to be.
How many covers does a MailWraps® collector typically purchase?
80% own more than 1 cover
65% own 3 or more covers
50% own 5 or more covers
16% own 10 or more covers
What about theft?
As you can see, MailWraps® fit so well they look painted on. Since it is not obvious how MailWraps® mailbox covers attach (the magnets are not visible from the outside), theft has not been a problem for our collectors. If it is a concern for you, however, we have included four anti-theft locking straps in each package.
Just select one or two unused mounting holes on each side of your mailbox and carefully punch out the matching pre-cut holes in your MailWraps® mailbox cover. Attach the locking straps through these holes. These tough electrical ties must be cut off before the mailbox cover can be removed. The locking straps can also be used to secure the cover to plastic or aluminum mailboxes. The straps are not reusable, but additional straps can be purchased at your local hardware store in the electrical department.
How do I store my MailWraps® mailbox cover?
Here are some suggestions for storing your mailbox cover:
- Before storing your mailbox cover, wipe both sides clean with mild soap and water.
- Store your mailbox cover on a flat surface. Many people store their MailWraps® mailbox covers by sticking them to the metal side of a cold-air return duct, a washing machine or refrigerator. You can even piggyback them one on top of the other!
- To prevent damage, avoid stacking other items on top of your stored MailWrap®.
|